While you press and hold the VOL+ button for 5 seconds, immediately plug the TV back into a working power outlet. Make sure remote is pointed directly to the TV sensor.
TV will then enter the recovery mode screen. You will see “Entering recovery system! Erasing”.
After the recovery is completed, the problem will be fixed.
You can use the remote control or the buttons on the TV to power ON to confirm whether the unit has been repaired.FAQs can be added to any page on your site or to your Wix mobile app, giving access to members on the go.
Kindly switch the date/time to be automatically updated by the TV and you should be able to access the internet again.
Please use troubleshooting instructions below:
Reset the remote:
It's possible that the remote won't operate for a while due to a bad battery connection or static electricity.
Remove the batteries from the remote and press each button twice to ensure that none of the buttons are stuck.
Replace the batteries, make sure they're fresh and working
Clean the TV's remote-control sensor lens.
The remote control has an effective range of 5 to 6 meters.
If the remote is paired with Bluetooth, make sure there are no other Bluetooth devicesconnected to the TV.
Change the time in the settings to manual then changed back to sync.
Then change the time zone to state (Ex: NSW) where you are located.
After changing the settings, you may try to do a tuning on the tv once more
